This printer was so very graciousoly donated to us from SeeCNC in Feb of 2015 as they where on their way home. This was the same trip they made and showed us their 17' delta printer. OMG! That think is awesome.

Link to product

0.91 Firmware

0.5 nozzle

6“ diameter (150mm - 75mm radius), 9” tall (220mm)

RAMBO controller, running Repetier

Load STL into slice3r, choose the PLA filament and Delta printer, set your layer high, infill, support, etc → export to gcode

Copy gcode to microsd card (using mutliformat usb reader). Remove the card and place into the left hand of the LCD panel, select the file from the menu and let it print.