Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Last revision Both sides next revision
prusai3 [2017/02/23 20:31]
John Benedetto ↷ Page moved from hardware:3dprinter:prusai3 to prusai3 		prusai3 [2019/08/15 19:14]
John Benedetto ↷ Links adapted because of a move operation
Line 1: Line 1:
 ====== Prusa i3 printer ====== ====== Prusa i3 printer ======
 +
 +<WRAP center round info 60%>
 +**THIS CONTENT IS HISTORICAL**: This printer was decommissioned, and this information is historical in nature. It has been superseded by the [[:blinky|Troybot, an i3v from MakerFarm]]. 
 +</WRAP>
 +
  
 {{:hardware:3dprinter:printer_prusai3.jpg?100  }}The Prusa i3 is a [[:3dprinters|3D printer]] at Quelab. It was built when the [[:prusa_mendel|Prusa Mendel]] caught fire; Ben K and Morgan G worked through a long night to get the carcass of the old printer disassembled and a new shell made. {{:hardware:3dprinter:printer_prusai3.jpg?100  }}The Prusa i3 is a [[:3dprinters|3D printer]] at Quelab. It was built when the [[:prusa_mendel|Prusa Mendel]] caught fire; Ben K and Morgan G worked through a long night to get the carcass of the old printer disassembled and a new shell made.
Line 21: Line 26:
     * Stuff we had lying around     * Stuff we had lying around
  
-Parts were laser cut on OUR [[:lasercutter|LASER CUTTER]] from SCRAP! And it looks pretty good all things considered.+Parts were laser cut on OUR [[lasercutters|LASER CUTTER]] from SCRAP! And it looks pretty good all things considered.
  
 ===== Preflight checklist ===== ===== Preflight checklist =====