Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
prusai3 [2019/02/03 05:10]
josh.pedersen 		prusai3 [2023/03/27 14:31] (current)
John Benedetto
Line 2: Line 2:
  
 <WRAP center round info 60%> <WRAP center round info 60%>
-**THIS CONTENT IS HISTORICAL**: This printer was decommissioned, and this information is historical in nature. It has been superseded by the [[:blinky|Blinky, an i3v from MakerFarm]]. +**THIS CONTENT IS HISTORICAL**: This printer was decommissioned, and this information is historical in nature. It has been superseded by the [[:blinky|Troybot, an i3v from MakerFarm]]. 
 </WRAP> </WRAP>
  
  
-{{:hardware:3dprinter:printer_prusai3.jpg?100  }}The Prusa i3 is a [[:3dprinters|3D printer]] at Quelab. It was built when the [[:prusa_mendel|Prusa Mendel]] caught fire; Ben K and Morgan G worked through a long night to get the carcass of the old printer disassembled and a new shell made.+{{:hardware:3dprinter:printer_prusai3.jpg?100  }}The Prusa i3 is a [[:room_sixteen|3D printer]] at Quelab. It was built when the [[:prusa_mendel|Prusa Mendel]] caught fire; Ben K and Morgan G worked through a long night to get the carcass of the old printer disassembled and a new shell made.
  
 It's pretty fly. It's pretty fly.
Line 26: Line 26:
     * Stuff we had lying around     * Stuff we had lying around
  
-Parts were laser cut on OUR [[:lasercutter|LASER CUTTER]] from SCRAP! And it looks pretty good all things considered.+Parts were laser cut on OUR [[lasercutters|LASER CUTTER]] from SCRAP! And it looks pretty good all things considered.
  
 ===== Preflight checklist ===== ===== Preflight checklist =====